Outpost Kaliningrad

Outpost Model 58 has no holes in), so the hardware is contracted without the screw 4). All other doors are equipped with a hole. And concluding the stage - to fix the handle from the inside. Dress rubber pad, we put into the spring and set it on the door. Initially, put the latch into the hole A).

Next, we need to fix the handle with two screws 12) and again to check the build quality! If the problem persists, you can lubricate all bolts porobovat VD40. Now you ready to install Outpost door with his hands. Self-assembly of a steel door Outpost. Instructions First, you should remove the old door-iron with grinders, wood - a hacksaw and dog, then prepare an opening for the door. Doors Outpost Kaliningrad are available in two sizes, it's 86 and 96 centimeters.

The doorway should be at least 3 and a maximum of 6-8 inches, more boxes. Then pulls the door so that it rested casing and check in, tucked under the bottom of the appropriate size wedge. Thus, the side where the hinges (side opening) should be as close as possible to the wall. Now expose the metal door Outpost level in two planes. With the punch, start the installation of the door with his hands, drilling the wall to a depth of at least 14 cm in openings ankertnye Drive in screws that are included. First drill the other side (top or bottom) which is tightly pressed to the wall, and then pressing and pressing the box to drive 2 more anchors. The first party we have done! Again, check the level and remove the wedge. Check visually whether the remains stationary door. If all happened, start to establish the principle of tomuzhe second side door.